Sentence examples for frame in the case of from inspiring English sources

Lifetime of a frame in the case of end to end data delivery is only until it is delivered to the destination.

The reason is that the final SI is highly correlated with the WZ frame in the case of high activity video content.

The complexity of this simulation step is significantly reduced because the required channels need to be generated only for the DL sounding OFDMA symbol, termed as Advanced Midamble (A-MIDAMBLE) in IEEE 802.16 m, and not for all OFDMA symbols in the DL portion of the frame in the case of TDD operation or in the DL frame in the case of FDD operation.

It is stressed that unlike the calculation of the CQI and BF feedback at the MS where only the DL sounding OFDMA symbol is sufficient, the channels for the simulation of DL transmission are generated for all OFDMA symbols in the DL portion of the frame in the case of TDD operation or in the DL frame in the case of FDD operation.

The attachment can be monolithic (exemplified by bulk-micromachined silicon resonators) or engendered by the adhesion of thin films to the supporting frame in the case of surface-micromachined devices [16].

The attachment can be monolithic (exemplified by bulk-micromachined silicon resonators) or engendered by the adhesion of thin films to the supporting frame in the case of surface-micromachined devices[16].

The computational cost is shown in Figure 7 in terms of the processing time as a function of the number of frames, in the case of images with different dimensions (notice the erratic processing time corresponding to the Horn-Schunck approach, which depends on the number of iterations needed to converge).

Furthermore, the surface of the table is much better denoised and closer to the noise free frame than in the case of the reference methods.

At steady-state conditions, only convection and radiation mechanisms are usually considered, since they are prevalent on the conduction mechanism that merely transports heat toward the surfaces of the mounting frame (especially in the case of rack-mounting free-standing arrays).

At steady-state conditions, only convection and radiation mechanisms are usually considered, since they are prevalent on the conduction mechanism which merely transports heat toward the surfaces of the mounting frame (especially in the case of rack-mounting free standing arrays).

The estimates for the latter can be obtained based on the knowledge of independent variables such as the physical data rate, mean frame size, and (in the case of energy consumption) the energy consumed per transmitted/received bit.