Sentence examples for frame element and from inspiring English sources

The exercise usually has a time frame element and is used to test the procedures.

The modeling of the superstructure was designed as for a frame element, and Isolator1 element was used to perform local nonlinear modeling of the isolation device.

Frame elements may be subjected to significant bending moments about cross-sectional minor axis such as space frame elements and struts that buckle about minor axes.

The reinforced concrete beam is modeled by Euler-Bernoulli nonlinear plane frame elements and a total Lagrangian approach.

The beams, columns, braces and zipper columns are modeled using nonlinear force-formulation frame elements and nonlinear geometric effects are included by utilizing corotational transformation.

The behavior model accounts for material inelasticity due to both single and combined stress states, and provides the ability to monitor the progressive plastification of frame elements and structural systems under increasing intensity of earthquake ground motion.

The RS models are calibrated through numerical data obtained by non-linear incremental dynamic analyses performed using different sets of ground-motions, strength distributions in frame elements, and values of the random variables adopted to describe the uncertainties in the structural behaviour.

Columns and beams are modeled as frame elements, and vertically distributed dead load acting on beams of each floor is assumed 2.5 t/m′.

(14) and (16) exhibit better performance on predicting the seismic response of RC frame elements, and Eq. (19) could be influenced by the frequency content of the earthquake, but Eq. (17) does not give good results for the two earthquakes (BF475 and BF975).

In the other template, a new interval is created with e and f as the frame elements, and { f} ∪ B ∪ X are the elements reversed.

We obtain the condensed version of the component by doing the following: for each smaller FCI contained in it, with pair of frame elements a and b (or - a and - b), we replace the FCI by a (resp. - a) and change the magnitude m of every element m > b in the component to be m - (b- a).