Sentence examples for fractured length from inspiring English sources

There are several main parameters that can influence the stress environment of different entry positions under key block B, i.e. the fractured length l 2 along the advancing direction of coal excavation, lateral fractured length l 1 which is perpendicular to the advancing direction, and the thickness h of the key block B, labeled as in Fig. 1.

The analysis we made on the effects of stress-sensitive coefficient, matrix permeability, fracture length and fracture conductivity on the productivity of fractured vertical gas well is significant for the tight gas development.

The underlying determinants associated with the Catastrophic walking trajectories were use of walking aids and indoor falls before the fracture, length of the inpatient period, offending pain on the fractured limb at discharge, and prolonged lower body pain.

Through microscopy observations, it was found that the fractured fiber length on the impact fracture surface increased with increasing fiber length and fiber content.

From the results it was found that in fractured reservoirs if the length of hydraulic fracture becomes greater, injection by hydraulic fracture will have high efficiency even at low pressure and volume.

The stress is greater if there is a voussoir beam structure, in which case the stress is directly proportional to the squared length of the fractured roof, and inversely proportional to the squared width of the pillar just before rotation occurs.

The dimensions of the hydraulically fractured region are 5 fractures with half-length of 350 ft in J direction, width 0.001 ft in I direction, and fracture height of 42 ft in K direction.

l 1 is the length of the lateral fractured structure as overlying strata breaks off, it is closely related to the length (s) of panel face and the periodic weighting distance l 2, their relationship can be expressed as below (Jiang 1993): l_{1} = frac{{2l_{2} }}{17}left[ {sqrt {left( {10frac{{l_{2} }}{s}} right)^{2} + 102} - 10frac{{l_{2} }}{s}} right] (1).

The aim of the present work is studying the effect of fracture geometrical properties such as orientation, length, intensity, discontinuity, and position of fractures on the performance of the VAPEX process in a fractured model.

Productivity curves of fractured vertical gas well with different fracture half-lengths are displayed in Fig. 3 and those with different fracture conductivities are plotted in Fig. 4.

This approach postulates failure by shear across the weld throat although fractured fillet welds often exhibit different fracture positions along their length ranging from the assumed throat fracture to detachment of the weld leg from the parent plate.