Your English writing platform
Discover LudwigSuggestions(1)
Exact(1)
Lastly, the fourth configuration is composed of the front-end, the main node, and warm-standby redundancy of the main node.
Similar(59)
Additionally, for 177Lu, the following fourth configuration was used: D. Tomographic (SPECT/CT) acquisition of a cylindrical phantom filled with uniform activity (HC; Table 2: experiment #14) .
MK: No wonder The Ninth Configuration is such a big deal.
The first configuration is a turbulent swirl combustor, modeled by the Helmholtz equation with an n−τ flame model.
By inserting a switching mirror, the objective part of the first configuration is blocked out; nevertheless the afocal of the wide FOV is activated.
When the boundary intersects a deeply grooved surface, a third configuration is possible, one in which both the surface and the grain boundary are partially wetted.
Two different configurations of modified system were presented in this paper: the first configuration is 4-zone SMB with one reactor, while the other one consists of one additional reactor.
The first configuration is actuated using a piezoelectric stack embedded under the sensor base yielding a base-type actuation while the second is actuated via a piezoelectric ZnO layer deposited on the surface of the sensor.
The first configuration is a piston source at the inlet port and a rigid termination at the outlet, and the second one is a piston at the outlet with a rigid termination at the inlet.
The second configuration is one in which the damper is in parallel with the spring but the damping force is proportional to the cube of the relative velocity across the damper (cubic damping).
Two configurations are studied: in the first case the beams are placed parallel to each other and only the transverse, Euler-Bernoulli modes are considered; the second configuration is more complicated with the beams placed perpendicular to each other, executing axial as well as transverse vibrations.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com