Sentence examples for formation strength from inspiring English sources

In comparison, the higher fracable formation should have smaller formation strength than that of the lower fracable formation.

The key factors influencing the optimal bit stick-out, such as hydraulic parameters, formation strength, and the ratio of bit-to-conductor dimensions, are also considered.

The current study evaluates influence of class F fly ash replacement level on the ettringite-based expansion and gypsum formation (strength reduction and mass loss) of Type V Portland cement concretes.

However, excessive dehydration can cause a decrease in the formation strength, thus reducing wellbore stability (Tan et al. 1996).

In contrast, thromboelastography provides the whole blood clot information, allowing evaluation of clot formation, strength and lysis.

The increased stresses due to fluid flow towards the production well and the pore pressure changes can exceed formation strength and initiate sand production (Penberthy and Shaughnessy 1992).

All tendons underwent mechanical testing to assess the 2-mm-gap formandon force and ultimate strength.

RESULTS: The 2-mm-gap formation force and ultimate strength of the Savage and knotless technique groups were not significantly different; however, both were significantly greater than those of the Kessler repair group (p<0.05).

TEG is a method of global haemostasis assessment, providing information on the rate of clot formation, clot strength and durability.

By this strategy, minimum and maximum horizontal stress profiles are determined in such a way that the stress concentration at the wellbore wall at the tensile fracture identified depths, exceeds the formation tensile strength, while at the breakouts identified depths it exceeds the compressive strength of the formation.

Simulations demonstrated that inlet weir aspect ratio impacted cell vortex formation and strength.