Sentence examples for formation of diffusion from inspiring English sources

Electrolytic-plasma/material surface interactions during processing can be used for cleaning of metal surfaces, formation of diffusion layers and/or deposition of metal, ceramic and composite coatings.

In an electrochemical system, ion transport near ion exchange membranes or electrodes induces inevitable concentration polarization (i.e., formation of diffusion boundaries), which impedes the mass transport and worsens the energy efficiency.

Formation of diffusion resistant calcium sulfate precipitates, within the pores and on the surface, induces a self-inhibition effect to mass transfer at the leaching sites.

The results indicated that the Ni-Re interlayer played a superior barrier effect, almost fully blocking interdiffusion and retarding the formation of diffusion zone (DZ).

It is found that when CO2 is added only to the oxidizer slit, stable flame can be obtained for Da < 1, whereas not for Da > 1 due to formation of diffusion flames near the fuel slits.

The high bond strength of the sputtered HA(+ ZrO2 + Y2O3)/Ti6Al4V composite coatings was attributed to the formation of diffusion layer in interfacial zone, the sputter cleaning and ion bombarding processes, and the mechanical interlocking effect resulting from the rougher surface of Ti 6Al 4V substrate treated by sandblasting and etching.

Thus, the result substantiates the importance of methyl radicals in PAH and soot formation, especially in the PAH formation region of diffusion flames.

In this process, the decrease of current indicates the formation of the diffusion layer.

The origin of this significant capacity reduction is probably due to the formation of a diffusion limiting interface.

There the dominant energy release arises from the formation of a diffusion flame.

This rough surface with island-like agglomerated subgrains could lead to the formation of a diffusion path for oxygen atoms or moisture from the surface to the substrate.