Sentence examples for formation of debris from inspiring English sources
The failure mechanism, which was investigated and analyzed in terms of microcracks, splat lamellae, formation of debris and silicate fibers, is tilting, spallation, interface delamination and fracture.
A transition in the twinning region, towards an average {1 1 2} glide plane, with the formation of debris loops is observed at higher temperatures.
Air-oxidation can remove the associated impurities in as-produced CNT material while inflicting considerably less damage than oxidising acid-treatment, and also does not lead to the formation of debris on CNT surfaces.
The failure patterns of these wet granules have a number of common features that have been observed for dry granules including the formation of debris with a conical geometry.
On the other hand, thick Sn layers as in the case of pure Sn electrodeposits result in a higher coefficient of friction of the tribosystem due to adhesive wear phenomena, brought about by the formation of debris at the sliding contact.
It is clear from SEM micrographs that the current, pulse on-time and tool material affects the integrity of machined specimen resulting in the formation of debris, deep craters, micro cracks and pock marks.
According to different formation mechanisms of debris, the grinding behavior of zirconia ceramics is categorized into elastic sliding friction, plastic removal, powder removal, and brittle removal.
The detrimental formation of abrasive debris might be inhibited by the selection of a more suitable class of as-cast Al alloy for the production of clamps.
Formation of wear debris was documented for thermoplastic polyurethane (TPU), whereas a load bearing particle structure was seen with PTFE/bronze material.
Smeared hexagonal MoS2 lubricant films were observed inside wear tracks while the tribochemical formation of wear debris occurred both inside and outside the wear tracks.
In the scope of the code development, IKEJET and IKEMIX were designed as key models for the breakup of a molten jet falling into a water pool, cooling of fragments and the formation of particulate debris beds.
