Sentence examples for formation of a deformation from inspiring English sources

(c) Formation of a deformation band.

The material shows a formation of a deformation layer, and the impact wear is small under the impact test.

Substructure evaluation revealed the formation of a dense array of deformation twins because of the plastic deformation, which often resulted in the subdivision of grains.

The specimen lifetimes in this latter regime were dependent on the initial stress intensity factor, Ki, and failure was associated with slow crack propagation preceded by formation of a wedge-shaped cavitational deformation zone at the notch tip.

The enhanced properties are attributed to the simultaneous formation of deformation-induced martensites and deformation twins and the additional plasticity due to deformation twinning in austenite grains having optimal mechanical stability.

A threshold strain rate of 103 s−1 is identified for the formation of localized deformation bands, which characterizes heterogeneity of deformation at high strain rates.

Rather than localisation onto a single slip surface, allowing formation of a continuous fault core, the deformation will be dispersed along several slip surfaces.

The ENE-striking faults initially developed by formation of deformation bands and associated slip surfaces (deformation mechanism 1).

It was found that the relationship between the radius of gyration of ssDNA and the channel radius is critical to the formation of deformation regimes in a narrow channel.

Tensile failures from the formation of the deformation cone and out-of-plane compression were considered, as well as shear failure.

Moreover, the stacking fault energy (SFE) in HEA increases the probability to initiate dislocation and twinning, which is conducive to the formation of complex deformation modes.