Sentence examples for for the infill from inspiring English sources

This situation mandates proper selection of independent variables for the infill drilling recovery model.

Determining the appropriate location for the infill wells is very challenging and greatly depends on different factors such as the reservoir heterogeneity.

Hence, it is recommended to account for the infill elements in both design and assessment procedure to ensure the safety of structural and nonstructural elements.

All the specimens utilized low-yield strength (LYS) steel for the infill panel and reduced beam sections (RBS) at the ends of the beams.

Without considering the effect of axial load, the VBE flexibility coefficient limit of 2.5 is applicable for the SPSWs with the width-to-height ratio of 1.0 for the infill steel plate.

Depending on the composite characteristics of the infilled frames, different elements are required in the model as for example beam or continuum elements for the surrounding frame, continuous elements for the infill panels and interface elements for representing the interaction between the frame and the panel.

The proposed method for the design of the infill offers the possibility to adjust the filling percentage and it is capable of providing a structure with isotropic properties.

Especially in the case of structure designed only for vertical loads, essence of the infill can be decisive under an unexpected earthquake, providing an additional contribution to the strength and to the stiffness.

A simple analytical model is developed, combining single-strut elements for the infills with nonlinear springs for the cellular material joints.

Finally, exploring the comparison of the PFA response of the bare and infilled frames for the 6 case study buildings confirms that significantly higher demands are to be expected for the latter, suggesting the necessity of accounting for the infills when performing detailed building-specific loss estimation analysis or designing acceleration sensitive equipment.

This work introduces non-parametric regression and neural network models for forecasting the infill drilling ultimate oil recovery from reservoirs in San Andres and Clearfork carbonate formations in West Texas.