Sentence examples for for the given material from inspiring English sources

The corrosion tests for the given material were carried out in different media; HCl, H2SO4, HNO3, H3PO4, and HClO4 (10%, vol).. Electrochemically borided low carbon steel showed a corrosion rate of 0.66 × 10−3 g/cm2/day in HCl, 1.13 × 10−3 g/cm2/day in H2SO4, 1.59 × 10−3 g/cm2/day in HClO4, and 3.37 × 10−3 g/cm2/day in H3PO4.

Individual spectra in the kinetic series show bands corresponding to reference spectrum for the given material.

By lowering the F− feed concentration from 30 to 15 mg/L, the peak retardation (μ′1) was enhanced by 30 60%, which was consistent with the nonlinear F− adsorption (N < 1) for the given materials.

However, the given materials for the structures may not be optimal or suitable since the boundary condition and applied loads vary in practical applications; hence the macro-structure and its material micro-structure should be considered simultaneously.

In this work, to improve the accuracy of FLD prediction under nonlinear strain paths for a given material, the evolution of the yield function is proposed in terms of the changes of its center and its curvature.

In this paper it is shown that, by applying the same approach to cracked bodies, one can find the critical distance for a given material, avoiding the use of an empirically-derived value.

In Equation 1, it is assumed that the GPC for a given material has no business with the material deposited in the previous cycle.

There is no statistical significant difference between the results obtained for a given material with the maturation media (P > 0.05).

The area of the hysteresis loop is maximum and gives the upper limit of the SAR for a given material; mathrm{S}mathrm{A}mathrm{R}=P/rho =Af/rho = 4{mu}_0{M}_s{H}_cf/rho.

In addition it is shown that for a given material the overall sintering quality is governed by the fraction of recrystallized material.

The general method for deducing CDTT for a given material under the prevailing conditions of sintering and the likely variables that influence the CDTT are described.