Sentence examples for for shim from inspiring English sources

The thixotropic nature and good compressive strength values are very important for potting, filling and fairing, as well as for shim applications.

It consists of a tetracoil43 with radius 260 mm for generating the B 0 field along the z axis, a B 1 coil in a Helmholtz configuration with radius 145 mm oriented perpendicular to B 0 in the y direction, a prepolarizing B p Helmholtz coil with radius of 90 mm oriented along the x axis, and a gradient coil in a Maxwell configuration with radius 306 mm for shimming along the z axis.

The PRESS spectra were then recorded inside a 2 mm3 volume (8 µl) at the center of the volume used for shimming.

We have found that the application of decay powers between 1 and 2 is required for accurate line shape prediction to account for shimming and other experimental artifacts.

The biopsies (13 ± 3 mg) were cut to fit 30 μl disposable inserts filled with 3 μl phosphate buffered saline (PBS) in D2O containing 1.0 mM TSP for chemical shift referencing and 1.0 mM Format for shimming.

Generally, most radiologists are reluctant to use MRS as an adjunct to routine imaging, since it requires additional steps for shimming the magnetic field and adjusting the system, and the spectra require skill to interpret correctly.

The 5-FC signal was maximal in the first acquisition that started within 10 min after the 5-FC administration (time needed for positioning of the animal, for shimming and for acquisition of a water signal used for calibration of the chemical shift), and declined slowly during the experimental time of up to 2 h.

The residual local inhomogeneity was then compensated for by shimming using the SC shim coil.

Typically a reactor is equipped with three types of rods for different purposes: (1) safety rods for starting up and shutting down the reactor, (2) regulating rods for adjusting the reactor's power rate, and (3) shim rods for compensating for changes in reactivity as fuel is depleted by fission and neutron capture.

Final designs can be done with finite elements to account for rubber nonlinearity and shim deformation.

After preliminary designs are established by using Mathcad or other programs based on the theory, final design may be done with finite elements, accounting for rubber nonlinearity and shim deformation.