The frequency analysis on two devices (Devices A and D) show that the resonant frequency of the sensor should be low for achieving maximum sensitivity and the damping factor must be 0.7 for getting the maximum bandwidth over which the sensitivity remains constant (60 Hz).
For example, the maximum bandwidth is 20 MHz, the second one is 15 MHz, and the minimum bandwidth is 1.4 MHz.
In order to maintain the network hierarchy structure and provision of QoS, our bandwidth request and grant manager always tend to allocate maximum bandwidth for the better channel conditioned SSs.
For dual band operation, a maximum bandwidth of 140.5 GHz was obtained at 3.35 THz and an efficiency of 87.3% was obtained at the first resonant frequency of 2.48 THz.
The occurrence of traveling shock waves associated to the sudden opening or closing of a valve, known as the hammer effect, is important from the perspective of control design because it imposes an upper bound constraint on the maximum bandwidth achievable for the controlled system.
As a consequence, the maximum bandwidth allocated for any flow cannot exceed the available bandwidth of the selected route even if the sum of the bandwidth available on the forward candidate set can meet the bandwidth requirement of the QoS request.
The authors of [10] propose to divide the scheduling services into two groups: one group consists of UGS, ertPS, and rtPS which adopt maximum bandwidth requirements for the admission criteria, while another group consists of nrtPS and BE which adopt minimum bandwidth requirements.
This scheme limits the admission of nonprioritized calls into the system to provide the call-level QoS requirements for handoff prioritized calls while acceptable QoS requirement is still guaranteed to nonprioritized calls.M is the threshold number for the nonprioritized calls.
Therefore, the maximum bandwidth of 8.18 GHz for the 600°C annealed device is purely from GS lasing.
