Sentence examples for for light intensity from inspiring English sources

Images were saved as TIFF files (16 bits) and were quantified using the ImageJ software for light intensity (range 0 to 256).

The resolution and the field of view are suitable for a see-through device: 800×600 and 40° ×30°, respectively, which is better for light intensity (×10) and field of view (×2) than other solutions.

Our results show that in MPCs optimized for light intensity modulation applications, in the red spectral region (near 650 nm), the achievable levels of optical transmission are limited to about 30%.

In the previous campaign, performed during a closing period of the site, almost all sensors showed no significant variation for light intensity, so related graphs were not considered; in this campaign, due to the presence of visitors, the situation was very different; so here we describe some useful details of the site.

Our use of the SVD appears to be very effective in the time domain, for extracting a time series from the Beer-Lambert law data, that looks very similar to the blood pressure data used as one of the sources when generating the data for light intensity I t) as measured by a photodiode.

However, in our case, the inverse-square law for light intensity, combined with the low sensitivity of the CCD in the blue region and with the emission drop of halogen lamps for those wavelengths, causes the white signal to fall close to the dark signal in the blue region.

Specifically, H E was estimated to be approximately 3 and 12 Oe for light intensities of 8.81 μW/cm2 and 2.73 mW/cm2, respectively.

For λ = 630 nm, exchange bias decreased with increasing intensity; H E was estimated to be approximately 16.0 and approximately 5 Oe for light intensities of 2.25 μW/cm2 and 1.83 mW/cm2, respectively.

It was possible to reach steady states in the oxygen production indicating short-term photosynthetic acclimation and the highest values during the incremental light step-changes were between 103 and 207 mgO2 gb−1 h−1 for light intensities between 141 and 505 μmol m−2 s−1 at 0.13 gb L−1.

This phenomenon was observed for light intensities of 400 and 50 lux but disappeared when only 10 lux were employed, probably due to difficulties in distinguishing between light and dark phase already in control animals (Fig. 5A).

The protocols for lighting intensity vary.