Sentence examples for for injector from inspiring English sources

For injector events, the attenuation factors were similar to those measured from the simulated sources.

Clearly, injectivity decline is a function of fracturing mechanics for injector performance and cake deposition resulting in permeability damage g from an adsorption coupled filtration scheme.

The stagnation point moves away from the injector well when the ratio of the absolute rates for injector and producer well rates becomes larger.

The thermal profile used for GC analysis was as follows: constant temperature for injector, oven and detector at 250°C, 200°C and 280°C respectively.

This paper summarizes the development of a simulation model for a piezoelectric fuel injector and associated driver that can be used for injector design and control system verification.

Open image in new window Fig. 19 Comparison of BHP for injector ECN-105i using different grids and well models for Case 4 Table 6 CPU times for Case 4 using original grid, LGR, and FGR Grid Original grid (7770 gridblocks) 3-level LGR (13,185 gridblocks) 3-level FGR (124,320 gridblocks) CPU time, h 0.2 1.9 23.

With this comes a growing health toll, including an HIV infection rate among steroid users which has reached 1.5% – as high as that for injectors of drugs such as heroin – and growing rates of hepatitis B and C infection.

Understanding how cavitation can be used to improve spray atomisation is essential for optimizing mixture preparation quality under early injection and stratified engine operating conditions but currently no data exist for injector-body temperatures representative of real engine operation, particularly at low-load conditions that can also lead to phase change due to fuel flash boiling.

Hence, engineers are regularly plagued with challenges such as optimal completions zones for injectors and producers, optimal flood pattern to adopt and number/type of producers and injectors to use in waterflood field development so as to improve oil recovery, but reduce water production.

Incidence rates for injectors were higher than for non-injectors until 1985 and lower thereafter (lower graph in Figure  2).

Recidivism was associated with amphetamine and heroin use, with an additive risk for injectors, and with polysubstance use.