Sentence examples for for different sectional from inspiring English sources

This paper presents a crashworthiness design of the regular hexagonal thin-walled columns for different sectional profiles.

A good approximation of the mean velocity was obtained for the different sectional reaches, except for the V-t5 analysis, even though the value for sectional reach 6′-7 remained critical (Fig. 5).

57 columns including three different sectional dimensions and nine slenderness ratios ranging from 30 to 80 are designed for axial compression tests.

Numerical results for different cross-sectional shapes are presented to demonstrate the efficiency and accuracy of the method.

Due to that, theoretical and experimental research has been undertaken on free over-falls with various approaches for different cross-sectional shapes.

The experimental data are being analyzed in terms of friction factor, laminar-to-turbulent transition, and the effect of roughness on fluid hydrodynamics for different cross-sectional geometries.

In acoustic experiments, the frequency response functions of two simplified rectangular double-cavity models and a half-scaled car model made out of Plexiglas are measured and compared for different cross-sectional areas and positions of a neck connecting two cavities.

The normal force distribution is calculated for different cross-sectional area values for the legs, between (0.0001;{text{and}};3.16 times 10^{4}), while keeping the cross-sectional area of the body, formed by the horizontal beams in Fig. 1, fixed at one.

The results of this investigation allow the evaluation of the behavior of the turbulent flow and convective heat fluxes for different square cross-sectional sections throughout the direction of the main flow, which is mainly influenced by the temperature distribution in the wall.

Fig. 10 Normal forces required by the feet of the robot for different legs' cross-sectional areas and different middle leg's positions with the body's cross-sectional area fixed at 1. Circles represent simulations performed using ANSYS.

The normal force required for each leg to stick on the wall for different legs' cross-sectional areas and middle leg's positions is shown in Fig. 10.