Sentence examples for for complete dissolution of from inspiring English sources

A solution composed of NaOH/urea/thiourea at an optimized ratio was used for complete dissolution of approximately 0.25 g dried fish samples within 20 min.

DICTRA was used to simulate heating rates of the order 10 500 °C/s with peak temperatures in the range 750 850 °C to predict isothermal annealing time required for complete dissolution of pearlite into austenite under different temperature-heating rate conditions.

Moreover, as the temperature increases from 25 °C to 60 °C, the time required for complete dissolution of the PUs decreases from 12 h to 50 min, indicating that the synergistic effect of reducing agent and temperature can accelerate the degradation.

Immersion times required for complete dissolution of differently modified microcavities are gathered in Table 1.

Agitators Bain-Marie was used for complete dissolution of the film in PBS at rotating speed of 50 rpm at 37 °C.

Then samples were weighed, mixed with 2 mL of chlorosulfonic acid, and magnetically stirred for 3 h to allow for complete dissolution of the scaffolds.

The rapid dissolution of class-II compounds will enable the time required for complete dissolution to be significantly less than gastric emptying time, thereby enhancing the possibility of achieving strong IVIVC correlation.

First, a solution of small gold seed nanoparticles was prepared by a fast reduction of gold salt (HAuCl4) by sodium borohydride (NaBH4) as follows: 4.7 ml of a water solution of CTAB (0.1 M) and HAuCl4 (0.25 mM) (concentrations calculated for a total volume of 5 ml) was stirred for 5 min at 30 °C to allow for a complete dissolution of CTAB and its complexation with the gold salt.

However, its effectiveness and usefulness in transfection greatly depend on the specific steps in the preparation of PEI water solution, such as filtration through 0.22  μm membrane for sterilization and removal of an undissolved PEI, heating for the complete dissolution of PEI, and final pH adjustment to the physiological pH (7.4) [ 26].

A rapid fusion protocol (<8 min) was investigated for the complete dissolution of various samples.

For the complete dissolution of the Zn (NO3 2 and HMT powder in DIW, the resultant solution was stirred using a magnetic stirrer for 20 min at RT.