Sentence examples for for complete dissolution from inspiring English sources

A solution composed of NaOH/urea/thiourea at an optimized ratio was used for complete dissolution of approximately 0.25 g dried fish samples within 20 min.

DICTRA was used to simulate heating rates of the order 10 500 °C/s with peak temperatures in the range 750 850 °C to predict isothermal annealing time required for complete dissolution of pearlite into austenite under different temperature-heating rate conditions.

Moreover, as the temperature increases from 25 °C to 60 °C, the time required for complete dissolution of the PUs decreases from 12 h to 50 min, indicating that the synergistic effect of reducing agent and temperature can accelerate the degradation.

This solution was stirred for complete dissolution.

Critical solubility limit for complete dissolution in epithelial lining fluid.

Immersion times required for complete dissolution of differently modified microcavities are gathered in Table 1.

The resulting simulations provide a general indication of the importance of (i) the use of real dissolution kinetics as opposed to the assumption of complete dissolution for the fines removal system of a DTB crystallizer; (ii) taking into account the hold-up of the annular zone; (iii) compartmentation of the crystallizer main body; and (iv) the modelling of internal classification.

When zinc acetate di-hydrate (Zn(CH3COO 2·2H2O) was dissolved under continuous stirring in double deionized water, and to this solution alkali sodium hydroxide was pored, it forms a white suspension for few seconds, but for the complete dissolution it was stirred for 10 min without precipitate at pH ~ 12.6.

The obtained solution was stirred for 10 min for the complete dissolution.

For a complete dissolution, the resulting mixture was stirred for 4 h at 90°C under reduced pressure (100 mbar).

First, a solution of small gold seed nanoparticles was prepared by a fast reduction of gold salt (HAuCl4) by sodium borohydride (NaBH4) as follows: 4.7 ml of a water solution of CTAB (0.1 M) and HAuCl4 (0.25 mM) (concentrations calculated for a total volume of 5 ml) was stirred for 5 min at 30 °C to allow for a complete dissolution of CTAB and its complexation with the gold salt.