For an orthotropic laminate with four clamped edges, no exact elasticity solution is available, and the deflection values predicted by different methods have a considerable difference each other for a small length-to-thickness ratio.
We retain that for a smallest length of the delay (r_{1}) and for an internal competition raised between the preys, this fixed point is globally asymptotically stable.
As hospitalisation in the CSPS occurs only in cases of emergency and for a very small length of stay (Ø < 1 day), beds are no appropriate indicator.
The straight blade design required the least torque, average power, peak power, specific energy and effective specific energy at 375 500 rpm which targeted for a small bite length for a fine soil tilth.
For a small filter length M=10, the largest eigenvalue becomes λ max=5.5 and the predicted stability bounds are reduced from μ lim M={1.66,1.81,2,1.85,1.11,0.55} of the white driving processes to μ lim M={0.95,1.29,1.05,1.01,0.74,0.31} which is well reflected in the simulation results.
For each small length, bring one end of the length around to the other end and join by squeezing the ends together.
The transcendental equations for the determination of the real contact zone length have been obtained for a general case and for a small contact zone length in an especially simple form.
The measured curves do not vary in a simple way since the surface roughness is "lost" differently for large and small length scales.
Stress and electrical displacements intensity factors are found in a clear analytical form which is especially easier for a small contact zone length.
