Sentence examples for for a given thickness from inspiring English sources

For a given thickness of protective foam, the geometry and the presence/absence of a shell affect the impact response.

On top of that, for a given thickness of porous fibrous material layer, the analytical relationship between fiber radius and optimal porosity under set frequency bands is constructed.

Maximum homogeneity and minimum energy of electrons for a given thickness of insulation is achieved with the use of this irradiation system.

An upper bound for thermal losses in a rigid-frame material is presented, and a simple rule of thumb is given for the required flow resistivity, porosity and tortuosity for a given thickness of porous material.

By controlling the lateral grain size evolution through the diamond growth conditions it has been possible to increase the in-plane thermal conductivity of the polycrystalline diamond film for a given thickness.

The model is able to capture the following experimentally-observed scaling laws: (i) for a given thickness, the shear band spacing varies linearly with curvature; (ii) for a given curvature, the shear band offset varies as the square of the thickness; (iii) the shear band spacing varies linearly with the thickness; and (iv) failure strain (bend ductility) decreases with increasing thickness.

Thus, for the flat lens with a given thickness t, the caused phase delay is simply determined by the width w of the individual nanoring when the light passes through it.

The simulation results by referring to the integrated flux of muons at various zenith angles penetrating through a given thickness are also given for the uniform average density value for ρ = 1.8, 2.0, 2.2, and 2.4 g cm−3.

The exposure time is 2 s for each layer with the given thickness of 50 μm.

For a given film thickness and sphere radius, the cohesive strength increases with increasing coat thickness and then tends to a constant when the coat thickness is up to a critical value.

The critical dipole arm length is determined by minimizing the twin formation energy for a given epilayer thickness and lattice mismatch strain, while a zero value of the minimum formation energy determines the critical thickness for misfit twinning.