Sentence examples for following voltage from inspiring English sources

Moreover, as reactive capacities in DGs, determined by inverters, are reserved in global voltage optimization, it can further reduce the switching operations of traditional devices in the following voltage control process.

Motor voltage is adjusted by the VSD unit from the nameplate value valid at 50 Hz to the following voltage, according to Eq. 6: U_{text{motor}} = 1,095 left( {27/50} right) = 810;{text{V}}.

The voltage V S is a function of the strain gauge resistance through the following voltage resistive divider relationship: V S = V DD R S R S + R P (6).

Green lines act as guides to the eye representing a series of conductance levels with equal interval of 1 G 0. b Conductance change from high resistance state to low resistance state following voltage sweep for three independent conductance states.

However, with the limit of compliance current, the loss of oxygen is not that serious that the HRS can be recovered through the redistribution of oxygen vacancies because of the passing of higher current and the Joule heating in the following voltage sweep, which corresponds to the reset process, whereas the so-called set process corresponds to the recovery of conductive filaments.

The isoelectric focusing was performed with the MultiphorII unit (Amersham Biosciences) employing the following voltage profiles [12]: linear increase from 0 to 500 V for 2500 Vh, 500 V for 2500 Vh, linear increase from 500 to 3500 V for 10000 Vh and a final phase of 3500 V for 35000 Vh.

We showed in the present study that in Kv channels this conformational rearrangement is not the voltage-sensor movement but rather the process following voltage-sensor movement.

The source was operated in positive mode with the following voltages: ground potential emitter, −4.5 kV capillary entrance, and −1.8 kV nozzle.

Proteins were subjected to isoelectric focusing with a multiphor II electrophoresis system (Amersham Biosciences) at the following voltages 300 V for 200 Vh, 1000 V for 300 Vh, 3000 V for 4000 Vh, 5000 V for 4500 Vh, and 5000 V for 3000 Vh.

Focusing was performed with a PROTEAN isoelectric focusing system (Bio-Rad) for a total of 60 kVh at 20 °C by applying the following voltages: 100 V for 1 h, 200 V for 1 h, 500 V for 1 h, 1000 V for 1 h, 4000 V for 2 h, 8000 V for 2 h and then holding at 8000 V until final volt-hours (60 kVh) was reached.

The combination of the conformational changes of both the VSD and PD following the voltage change is called the voltage gating, which is indispensable for the initiation and propagation of the action potentials in mammals.