Sentence examples for following capability from inspiring English sources
Similar test results were also observed in the command following capability test for indoor humidity.
(8) 100% natural circulation resulting in passive load following capability and autonomous control.
The first demonstration used the system to supplement distributed microturbine generation and to provide load following capability.
Tight turbine steam temperature control is a necessity for obtaining long lifetime, high efficiency, high load following capability and high availability in power plants.
Regenerator heat storage is a cost-effective solution to provide solar tower power plant with operational flexibility and load- following capability – a key factor for marketability.
The controllability tests with respect to both the disturbance rejection capability and the command following capability were carried out to assess the control performance of MIMO controller.
This makes control of the coal flow difficult, causing stability problems and limits the plant's load following capabilities.
Semi-active dynamic vibration absorbers have one or both of the following capabilities: (a) initial displacements set to non-zero values and (b) damping adjustable in real time.
For improving track density, servo control systems can be designed on the basis of information from a position error signal to improve the track following capabilities in a tape drive.
The model has the following capabilities: (1) conducting undrained shear strength analysis (USA) and effective stress analysis (ESA) slope stability analysis of staged construction, (2) incorporation of field monitored data of pore water pressure, and (3) incorporation of increase of undrained shear strength with depth, effective stress, and pore water pressure dissipation.
The purpose of these experiments was to assess the following capabilities of the SINRD detector: 1) reproducibility of measurements to quantify systematic errors, 2) sensitivity to water gap between detector and fuel assembly, 3) sensitivity and penetrability to the removal of fuel rods from the assembly, and 4) use of PNMC/SINRD ratios to quantify neutron multiplication and/or fissile content.
