Sentence examples for foam injecting from inspiring English sources

A foam injecting system was designed and assembled to investigate the flow patterns and drag characteristics of Tahe heavy crude oil flowing through a horizontal pipe under the action of two kinds of AFS 2 foams with different air volume fraction.

The revised vehicle also has expandable polyurethane foam injected into several platform cavities.

They contain foam injected in to the cavity between the inner and outer shells to help this.

The increase in volume of recovered residual oil is due to the formation of macroemulsion inside the core after the first slug of foam injected and foam breakage.

Foam injected above the gas column suppresses the early breakthrough of gas and has been used as a GOR control technique (Dalland and Hanssen 1999; Krause et al. 1992).

It produces high quality foams by injecting compressed air into foam solution.

To simulate the post-foam acid stage used in acidizing, brine was injected following foam injection in each experiment and the residual permeability and foam stability were observed.

For foamed admixture, ADVERA® WMA was selected; whereas for free water systems, WMA was foamed by injecting a small amount of water that was produced under a laboratory setup.

Foam was injected into the targeted cyst through the catheter, and fluoroscopy confirmed the absence of foam migration into surrounding hepatic vessels (Fig.  1D).

Sometimes an expanding polyurethane foam is injected into the first few feet of soil under the slab.

Both of brine water and foam were injected at a rate of 0.5 mL/min.