Sentence examples for foam gas from inspiring English sources

It is observed that larger slug size increases the novel foam gas injection rate and enlarges the contrast between two types of foams (Fig. 27) since the novel foam will lower the injection pressure further with larger slug size.

It was shown that, in light aluminum foams, gas compression contributes the additional dynamic stress.

Once this mixture is blended with isocyanate or the black component like in conventional foaming processes, the consequent exothermic polymerisation drives the release of the captured CO2 from the micelles, serving as the foaming gas.

In both models foam hinders gas mobility through increasing its apparent viscosity.

By using firefighting foam, the gas station may use the tanks again if lava bypasses the area and it wants to reopen.

Foam height, gas hold up, bubble velocity, and specific gas/liquid interfacial area were measured in situ.

Composed of one surfactant, a traditional foaming agent generates stable foam with gas or air to block high-permeable swept zones and to improve the sweeping efficiency without significantly improving displacement efficiency.

Previous studies upon the use of gas liquid foam for gas absorption operations have demonstrated limited potential for the technique, mainly because the liquid films rapidly become saturated with the absorbing gas due to the relatively low liquid fraction within the foam.

The effect of foam on gas mobility was measured by using core flood tests.

The main objective of this research is to generate stable foam for gas mobility control using surfactant blend formulation.

Blaker (1999) investigated the use of foam for gas mobility control in the Snorre Field, one of the major oil fields in the North Sea, located 150 km offshore.