Sentence examples for foam compared from inspiring English sources
Laboratory tests showed increased concentrations of oleic acid in the foam compared to the biogas sludge (L Moeller, unpublished results).
The majority of the surface active amphiphiles produced expanded into foam that was formed during cultivation in a bioreactor as indicated by lower surface tension values present in the foam compared to the cultivation medium.
Results indicate that the heat transfer features of 13-mm pellets are more similar to those of 10-PPI ceramic foam compared with 6-mm pellets and 9-mm pellets.
It was found that, although the elastic modulus of the foam compared to the homogenized modulus of the GFRP deck was about the order of 10−3, the structural behaviors in the transverse direction such as the nominal strength, stiffness, etc. were greatly improved when the GFRP bridge deck was filled with foam.
Reduction in lesion counts at week 12 was statistically greater (P<0.001) for the tazarotene foam compared with the vehicle foam.
Similar inconsistent results were found in an RCT analysing treatment of chronic lower leg ulcers with a polyhexamethylene biguanide (PHMB) coated foam compared to standard foam dressings.
Such studies will also explore how the aerosolized foam compares with many other kinds of surgical skin preparation products/techniques and whether the anticipated advantages of using the aerosolized foam (lower "error" rate due to its ease of use, and saving healthcare costs by virtue of requiring less time compared to the standard method) can be realized in a "real world" clinical setting.
Biomineralization caused a significant increase of mechanical properties of treated foams compared to untreated ones.
The obtained results reveal that adding nanoclay increases the cell density and decreases both foam density and cell size of ABS/nanoclay composite foams compared to the pure ABS foams.
It is found that the inertia effect has a larger influence on the rate sensitivity of the lower density foams compared with the higher density foams.
The catalyst, having high activity in urethane reaction, produces a larger number of small cavities and pores in the foams compared to the catalyst having low activity.
