Sentence examples for flying height from inspiring English sources

To develop a flying-type optical head mounted on a slider with flying height below 100 nm for Near Field Recording (NFR) application where removability of the media is required, plastic media is preferred because of their manufacturing cost effectiveness.

To achieve rigorous glide performance for ultra-low flying height, disk media with asperities that exceed the flying height of the magnetic head must be eliminated.

The vibration induced variation of the flying height is also significantly reduced.

This paper reports the authors' efforts in both reducing slider's gap flying height and increasing the stability of the flying height.

This design concept is being partly realized by thermal flying height control technique.

Therefore, the effects of disk waviness on flying height modulation (FHM) cannot be neglected.

The resulting distributions of flying height, pitch angle and roll angle are near Gaussian.

The temperature of the read sensor increases with the increase in flying height of the slider.

With the decrease in slider flying height, slider lubricant disk interaction is becoming increasingly important for the ultra-low flying height head disk interface because the interaction results in potential slider flying stability problems.

Roughness of disk media influences the tribological interaction of head-disk interfaces, especially when the intended flying-height is below 5 nm that is required to achieve extremely high-density recording (EHDR).

In order to achieve higher recording density in hard disk drive (HDD), thermal flying-height control (TFC) slider design has been used to reduce the physical spacing between the read/write elements in the slider and the rotating disk surface.