Sentence examples for flux type from inspiring English sources

The specific heat capacity of these materials is measured at temperatures ranging from 30 °C to 150 °C using a heat flux type differential scanning calorimeter (DSC).

Also most existing fractional flow-based models consider only specific boundary conditions, which are usually Dirichlet type pressure for water phase, and flux type boundary for NAPL phase or particular combinations for individual phase.

Melting kinetics of polymer crystals has been examined experimentally by calorimetric methods utilizing the combination of a conventional differential scanning calorimetry of heat flux type (CDSC-HF) and a temperature-modulated DSC TMDSCC).

Complex heat capacity obtained in melting region of polymer crystals by temperature-modulated differential scanning calorimetry of heat flux type has been calibrated with a method based on a model proposed by Hatta.

The results indicate that while good quality joints are easily obtained at low cooling rates, at high cooling rate all the C.O.S. parameters such as flux type, strap composition and melt temperature must be carefully controlled to achieve an acceptable joint.

On the other hand, RC structure damage showed equal sensitivity to the aleatory uncertainty of the tsunami generation as well as the epistemic uncertainties due to the numerical modeling of the tsunami inundation (friction), the building classification (material and date of construction), and the type of fragility curves (depth or momentum flux type curves).

Although the B2 rotating disk showed the highest filtration flux, Type-A2 and Type-C disks had the optimal designs, which were achieved by considering the filtration flux and power consumption simultaneously.

The advantage in the use of a general boundary flux concept relies in the impossibility to misinterpret its value, and it helps in eliminating the confusion among membrane practitioners to discriminate between different flux types.

Indeed, the reverse fountain structural mechanism requires the presence of three flux types-acropetal, lateral, and basipetal.

A complex sawtooth modulation was created using a TMDSC of the heat-flux type, controlled close to the heater.

In the codes, the interfacial drag is determined based on drift-flux type correlations for the distribution parameter and void-weighted area-averaged drift velocity.