Sentence examples for fluidized velocity from inspiring English sources

The results indicated that a lower bed pressure drop (without considering lower gas velocity in a fixed bed stage) and higher minimum fluidized velocity are achieved with increasing agitation speed.

The fluidized velocity in the side beds is lower and wear of immersed tubes is also lower.

A design procedure was developed for a 50 kWth lab-scale gasifier, and the calculations were made based on the essential parameters such as volumetric flow rate, minimum fluidized velocity, residence time to find out the dimension parameters of the reactor.

The pulverized coal was extremely hard to be fluidized and its experimental incipient fluidizing velocity was much larger than expected.

Particles may be ejected into the freeboard from the roofs or wakes of bursting bubbles, depending on bed geometry, fluidizing velocity U and particle type.

At the particle-scale level, larger SRT is observed in the right chamber as compared with that of the left one, and the increase of fluidizing velocity reduces the SRTs in the two chambers.

Prashant et al. (2010) studied the effect of operating parameters such as the type of media, fluidizing velocity and separating time on beneficiation performance investigated under both batch and continuous ADMFB separators which are demonstrated in Figs. 5 and 6 respectively.

LEM is proposed to describe the liquid pulsed fluidization with acceptable engineering accuracy as compared with the experimental data, and its shortcomings are also discussed at length by analyzing the relaxation processes of the two-phase flow due to a jump change of fluidizing velocity and the structure of concentration discontinuity which forms in the bed collapse process.

The effect of the main operating variables (bed solids hold-up, inert material size, fluidizing velocity, plastics feed rate) on the agglomeration and the defluidization phenomena was investigated by means of experiments carried out in the bed temperature range of 450 650°C.

The plant can be operated with fluidized bed heights of up to 0.70 m, and fluidizing velocities of up to 3.5 m/s at typical combustion temperatures.

Minimum fluidization velocity, fluidizing behavior and adsorption/desorption properties of the sorbent particles were determined in a laboratory scale fluidized bed reactor (i.d., 0.03 m) in the temperature range up to 1073 K.