Sentence examples for fluidized heating from inspiring English sources

The reactor was heated rapidly (within 2 min) to an internal temperature of 140 ± 2°C and maintained at 140 ± 2°C in a fluidized heating bath for 40 min. At the end of the reaction time, the reactor was cooled to below 50°C in a water bath.

The vessel was lowered into a hot sand bath and heated rapidly (within 2 min) to an internal temperature of 140 ± 2°C and maintained at 140 ± 2°C in the fluidized heating sand bath for 40 min. At the end of the reaction time, the reactor was cooled to below 50°C in a water bath.

Fuel-lean mixtures of CH4 and air were burned when fluidizing electrically heated beds of silica sand particles maintained at a temperature between 1000 K and 1300 K.

In order to investigate the heat transfer characteristics of fluidized bed heat exchanger (FBHE), a series of experiments was carried out in a commercial 300 MW circulating fluidized bed (CFB) boiler with FBHE.

In order to investigate the heat transfer uniformity of fluidized bed heat exchangers (FBHEs), a series of experimental tests were carried out in a commercial 300 MW CFB boiler.

Improved heat transfer through immersed fluidized bed heat exchangers as well as a significantly lower number of theoretical stages indicate that the proposed TSA contacting devices will allow for a more compact design as compared to gas liquid systems, which would lead to reduced capital costs.

In a gas fluidized bed, heat to and from a heat exchanger surface can be transferred by the gas and/or particle convection.

During the periods of high power demand the system can deliver additional thermal power by extracting heat from a series of fluidized bed heat exchangers fed with solids from the high temperature silo.

Lean/rich heat transfer may be possible using fluidized bed heat exchangers within the dense bed phase of both transport risers.

The excellent performance of fluidized bed heat exchangers is related to the interaction between particles and heat transfer surface and to mixing effects in the viscous sublayer.

In this paper, freeze concentration is studied inside a fluidized bed heat exchanger (FBHE), which is a cheaper alternative to the conventionally used scraped surface heat exchanger (SSHE) in a freeze concentration process.