Sentence examples for fluid nozzle from inspiring English sources

As shown in Figure 1, the PWE system for synthesis of EG-based ZnO nanofluids consists of three main components which are the pulsed power generator, the control panel, and the evaporation chamber with continuous wire feeding and fluid nozzle subsystems.

Then using the paint gun key find the correct size for the fluid nozzle and remove the fluid nozzle by turning counterclockwise.

Run used thinner into waste thinner container through the fluid nozzle.

In conventional two fluid nozzles, the high velocity air imparts its energy to the liquid and disrupts the liquid sheet into droplets.

The prepared solutions were sprayed through the 0.7 mm fluid nozzles in the spray dryer.

Then, the atomization was performed by a twin-fluid nozzle, using compressed air at 1.5 bar.

A two-fluid nozzle with a cap orifice diameter of 0.7 mm and a co-current flow was used.

Spray freeze-drying (SFD) process, which is a novel particle design technique previously developed by authors, has been improved by using four-fluid nozzle (4N) instead of conventional two-fluid nozzle (2N) to expand its application in pharmaceutical industry.

The analysis and procedures here described could be easily applied to any twin-fluid nozzle with an internal mixing chamber.

We prepared microparticles containing nanoparticles of water-insoluble pranlukast hemihydrate (PLH) using a 4-fluid nozzle spray drier.

Then, it was atomized at 205 °C applying a two-fluid nozzle with atomizing pressure of 0.8 MPa and the outlet temperature of 110 °C.