Sentence examples for flue gas analysis from inspiring English sources

A sensor array consisting of discrete thick-film sensors based on various semiconductor metal oxides (SMO) has been designed and fabricated for flue gas analysis purposes.

In an initial validation step during propane flame operation, the measured axial EFR profiles of H2O density-weighted, path-averaged temperature, path-averaged H2O concentration and H2O column density are found in good agreement with 2D CFD simulations and standard flue gas analysis.

Based on the flue gas analysis, the slip stream was cooled down and filtered for humidity and PM removal to protect the membrane module located downstream.

In addition, the combustion efficiency was evaluated based on the after burning flue-gas analysis.

The evolution of the fire chamber, temperature variation rate, and mass of burned carbon were analyzed using temperature measurements and flue gas composition analysis.

Gas analysis was performed using an FTIR flue gas analyser (Protir 204 M, Protea, Crewe UK), where the flue gas sample was extracted via a sample point maintained at a temperature of 180°C and at a location approximately 4-5 metres from the outlet of the combustor.

This paper deals with an exergetic analysis of the flue gas pre-dried lignite-fired power system (FPLPS) based on the boiler with open pulverizing system (OPSB) to explore the energy-saving potential of the FPLPS.

A sensitivity analysis was conducted to determine the effect of flue gas temperature, particle diameter, and SO2 concentration on the extent of sulfation.

These results demonstrated the capability of this method in long-term analysis of the trace chlorinated benzenes in the flue gas.

Gas analysis was sampled at different locations in the system using a TESTO 335 flue gas analyzer.

To optimize the flue gas utilization in algal photo-bioreactors, we performed both model simulations and experimental analysis.