Sentence examples for flow rate varying from inspiring English sources

The experimental variables studied included: (i) gas flow rate, varying from 2 to more than 10 times that required for minimum fluidisation; (ii) mean particle size, ranging from 0.138 to 0.275 mm; and (iii) internal bed thickness from 2.1 to 4.9 mm.

Figure S2, Supporting Information, presents the flow rate varying with backpressure.

Ep (adrenalin 1 mg⋅mL-1, RenaudinTM diluted to 100 μg⋅mL-1 or 50 μg⋅mL-1 in Glucose 5% BaxterTM, UK) was infused using a programmable electric syringe pump (DPS, Fresenius VialTM, Brezins, France) through a triple-lumen central venous catheter (Arrow, TeleflexTM, PA 19605, USA) with a flow rate varying from 0.3 mL⋅h-1 to 1 mL⋅h-1.

Six tests were performed for flow rates varying from 50%to95%5% of design.

The limiting current densities were determined to be in the range 2.15 3.35 amp/m2 for feed flow rates varying from 18 to 108 L/h.

Also discussed are the start-up procedure and effects of hydrogen and air flow rates varying from 0.4 slpm to 1 slpm on cell performance of these two single-cell stacks which are measured over a range of the operating temperature varying from 650 °C to 850 °C.

The computational cases investigated are based on the design conditions of the HTHF, i.e., a maximum operating pressure of 3 MPa, hot and cold side inlet temperatures of 1173 K and 813 K, respectively, and mass flow rates varying from 10 to 80 kg/h.

Leachate of CL was discarded without further treatment, while leachate of RL was continuously recirculated using pumps with adjusted flow rates varying with leachate volume every day, except for the first week when no recycled leachate was fed to the simulated landfill.

An analytical model describing the various temperatures and heat transfer characteristics of such a parallel flow packed bed solar air heater (PFPBSAH) has been developed and employed to study the effects of the mass flow rate and varying porosities of the packed material on its thermal performance.

All SEM images were of samples collected at 8 MHz repetition rate, 15 W average power, 10 SCFH nitrogen flow rate, and varying dwell times of 2 and 10 ms.

We hypothesize that the delivered dose of amikacin will not significantly change with increased O2 flow rate or varying orientation.