On-line data acquisition included pH, stirring rate, pO2, temperature and air flow rate, off-line analyses included measuring the OD600 and the pH during fermentation.
Patients with septic shock and acute kidney injury received either SHF-HD (EMiC2® filter; Fresenius Medical Care) (cut-off = 40 kDa, dialysate flow rate of 40 ml/kg/hour) or conventional CVVH (cut-off = 30 kDa, UF flow rate of 40 ml/kg/hour).
To increase energy efficiency in melting, it would be possible to collect the off-gas (volumetric flow rate of 55,000 m3 h−1 at 950 °C) below the charge-hole and then in a post-combustion unit.
A switch-off time of ∼2 min at a flow rate of 0.3 mL min−1 was demonstrated.
ZrO2 layer is achieved under an O2 flow rate of 20 sccm while the ZrO2 − x layer is obtained by switching off the O2 flow for 20 s.
We used an off-line technique to measure eNO, according to ATS/ERS criteria 18 at an expiratory flow rate of 200 ml/s.
We consider the problem of choosing the data flow rate on a wireless link with randomly varying channel gain, to optimally trade off average transmit power and the average utility of the smoothed data flow rate.
To balance the conductivity, uniform porosity, and structural stability of the coatings, the effects of process parameters such as hydrogen gas flow rate, stand off distance and pore formation precursor (graphite) addition on the microstructures of the resulting coatings are investigated.
The following parameters were varied during coating deposition: arc current, secondary gas, i.e., hydrogen flow rate, stand-off distance (SOD) and angle of powder injection.
The performance of a plasma spray coating depends on various parameters such as, plasma power, gas flow rate, stand-off distance and design of plasma spray gun [5, 6, 7, 8].
Specificity and sensitivity were 44 and 80%%, respectively, when values 64 ml/s/m were used as LACV flow rate cut-off (ROC area 0.62, p = NS).
