Sentence examples for flow rate boundary from inspiring English sources

Many scholars have carried out the researches by means of numerical simulation or physical simulation experiment individually, but the reports which combine the two methods and define the flow rate boundary between different dissolution patterns in carbonate acidizing are rare.

Simulating field conditions by conducting laboratory experiment require geometric similarity (composition of experimental and formation sand; diameter, slot height, slot length of experimental and field screen), physical similarity (production pressure difference and gas flow rate), boundary similarity.

This experiment is designed to acquire the flow rate fluctuation boundary of forced single-phase flow in rolling motion and to get an insight into the flow friction characteristics under large flow rate fluctuation amplitudes.

Using several numerical tracers experiments with different operating scenarios, such as the HFCW physical configuration, the flow rate, the boundary conditions, the adsorption layer thickness, practical methods and a new empirical law are suggested in order to substantially increase the adsorption ability in the HFCW, and hence the pollutant removal.

Before pressure reduction arrives at outer boundary, flow rate at outer boundary is zero.

Use of total pressure, mass flow rate and velocity boundary conditions at the inlet along with extended domain options are evaluated for inlet boundary modeling.

But as the flow rate decreases, the boundary layer re-attaches to the surface causing dribbling.

In designing a capillary tube, it is necessary to calculate the flow rate for given boundary conditions on pressure and temperature at the inlet and exit.

Therefore, the displacement is determined only by the x-component of the flow rate in the boundary layer, and the growth of the vertical shift is proportional to the flow rate.

As mentioned, the boundary layer displacement thickness, δ *, is defined as the distance by which the inviscid surface streamline must be displaced so as to account for the reduction in flow rate in the boundary layer (Eq. 15).

It can be difficult to use mass flow rate as a boundary condition.