Sentence examples for flood mode from inspiring English sources

For Alkaline flooding, the water oil relative permeability curves to successfully match waterflooding (secondary flood mode), and Alkali viscosity to perfectly match the additional RF (tertiary flood mode) were tuned.

(You cannot do this in a matchmaking game unless you are in Halo 4's Flood mode) Pull up the start menu, and press the Y button to bring up your friends list.

While, for tertiary flooding mode, it is recommended to apply DSF instead of continuous low-salinity flooding.

Altering flooding mode to WAG does not change variation trend in terms of injection PV of gas breakthrough discussed above.

CO2 WAG injection, continuous CO2, or water injection tests were then conducted after the establishments of connate water saturations in secondary flooding mode.

Moreover, the results show that CO2 treatment can improve gas productivity by a factor of about 1.39 compared with the water flooding mode.

When the flooding mode changed to WAG, the oil recovery factor exhibits slight rises compared with the injection mode of consecutive at same permeability contrast as shown in Fig. 10.

The results presented in Fig. 6 clearly demonstrate that for secondary flooding mode, i.e. Injection at connate water saturation, UER brine diluted to 5,000 ppm is superior to DSF.

According to Figs. 9 and 10, for continuous flooding mode, the oil recovery factor for the core permeability contrast of 5.7, 3.0 and 1.5 is 6.35, 14.62 and 15.94%, respectively.

Low-pressure receivers have been shown to be an effective way of allowing evaporators to operate in a fully flooded mode thus enabling more efficient use of the evaporator surface for heat transfer.

After six years of operation, nearly 0.26 million ton of CO2 (0.32 Hydrocarbon Pore Volume) has been injected under a miscible or near-miscible flooding mode with CO2 utilization efficiency of 6.3 MScf/bbl, and an expected enhanced oil recovery of over 10% would be achieved.