Sentence examples for flexure testing from inspiring English sources
The composites were photo-cured and tested by biaxial flexure and three-point bend flexure testing.
Similar to the results obtained in four-point flexure testing, specimens including steel fibers exhibited better post-cracking flexural behavior than that without fiber, and specimen S80-0.5 S80-0.5exhibitedr flexural similarh and higher deflexural capacity than strength S65-0.75, even though its fiber content wandlower.
In this respect, a biaxial disc flexure testing device has been designed.
Indigenous sandwich composites comprising ferrocement skins with jute burlap reinforcement and an aerated concrete core made of lime-gypsum matrix and saponin foaming agent were fabricated and subjected to flexure testing.
While samples did not exhibit graceful failure under flexure testing, meaning they could not sustain any load beyond the initial failure event, compositions with 17.5% W Ni Fe, 30% W Ni Fe, 30% Ni, and 50% Ni displayed the ability to deflect cracks generated by Vickers indents produced using a load of 50 kg.
Table 3 Flexure test results for PS girders.
The ENF test is simply a three-point flexure test on a pre-cracked specimen.
Open image in new window Fig. 12 Flexure test: distributed load versus mid-span deflection.
The flexure test was conducted in crack mouth opening displacement (CMOD) control.
In order to perform the flexure test, polymer concrete prisms were fabricated from each mix.
In each case, the cube compressive strength test, and beam flexure tests were conducted.
