Sentence examples for flexure analysis from inspiring English sources

It was used for the static flexure analysis of thick isotropic beams.

Fig. 7 Flexure analysis from two-dimensional admittance between FGAs and topography around LMS area.

Considering the updated frequency and accuracy, we chose Global Topography V18.1 as the DEM data in flexure analysis.

As described above, the T e is acquired by the spectral method, which is the flexure analysis method of the frequency domain.

One example is flexure analysis, in which Europa's crust is modeled as a plane or sphere weighted and flexed by a heavy load.

The experimental investigation is conducted on subscale specimens loaded in flexure, using dynamic mechanical analysis (DMA) equipment.

The analysis of flexure hinge is performed then the maximum displacement amplification ratio of structure is obtained by optimization through analytic formulas, where the geometrical parameters of structure are selected as design variables.

Results indicate that while Timoshenko's shear deformation theory gives reasonably accurate information regarding the set of bending natural frequencies, there are considerable discrepancies in the information it gives regarding the mode shapes and dynamic response, and so there is a need to consider higher order models for the dynamical analysis of flexure of beams.

Mechanical responses of treated fiber reinforced biopol composites (TJBC) without nanoclay evaluated using dynamic mechanical analysis (DMA) and flexure tests showed 9% and 12% increase in storage modulus and flexure strength, respectively, compared to untreated jute fiber reinforced composites (UTJBC).

Fourier transform infrared spectroscopy (FTIR), rheology, dynamic mechanical thermal analysis (DMTA) and flexure tests were conducted.

A 6-DOF stiffness equation of the proposed flexure joint is obtained by analysis of leaf spring stiffness.