Eleanor Mills, the murder victim, read Simon Called Peter, a scurrilous novel also found in Myrtle's flat; Mills's husband may have partly inspired Myrtle's pale, vapid husband, George.
The following instrumental conditions were used: flat milling with sample rotation and periodic beam irradiation interruption, beam-on for 1 rotation (25 rpm, means 2.4 s), beam-off for 27.6 s (30 s period) total processing time 99 min (beam-on total 475 s), beam energy 4 keV, beam current ~135 µA, and irradiation angle 60° from vertical and zero excentricity.
Roughing is made using zigzag cuts with a flat end mill, and finishing is done with isoparametric toolpaths using various rounded end mills.
Solid Tungsten Carbide flat end mill cutter of size 700 µm and 800 µm are chosen as the tool material.
A mechanistic force model for double helix tools is developed based on milling force data obtained on flat end mills.
Three types of mechanical micro-tools, namely, micro flat-end mill, micro ball-end mill and micro-drill having equal diameter of 200 μm each, are used to fabricate circular micro-dimples with flat, semi-hemispherical and conical end geometries, respectively, on Ti-6Al-4V surface.
It was concluded that the RUEM process is suitable to mill flat surface on CFRP composites.
For the differing biomass materials, the specific energy requirements for the flat ring pellet mill was measured and varied between 101 to 324 kWh/Mg depending on the crop and moisture content.
A flat die pellet mill was used to understand the effect of high levels of feedstock moisture content in the range of 28 38% (w.b ., with die rotational speeds of 40 60 Hz, and preheating temperatures of 30 110 °C on the pelleting characteristics of 4.8 mm screen size ground corn stover using an 8 mm pellet die.
Back in Salford, naffed off and chippy, Katie and Jules began tinkering with music in their shared flat in Islington Mills - a northern version of Warhol's Factory that houses all manner of arty dreamers.
