"flange diameter" is a correct and usable term in written English.
You can use it when discussing mechanical engineering or plumbing. For example, "The flange diameter of the pipe must be measured before installation."
The actuator has a length of 220 mm, flange diameter 40 mm, and outer diameter 25 mm.
As shown in Fig. 4b, the flange diameter, pin diameter, and height of the prototype are 59, 16, and 4 mm, respectively.
First of all, we set the gear flange diameter and the pitch circle diameter are D = 59 mm and d p = 36 mm, respectively.
20 cross-linked-polyethylene XLPE Opera cups (Smith and Nephew, Andover, MA) with a 43-mm outer diameter (flange excluded), a 28-mm inner diameter, and no orientation wire were used.
The sample chamber is made up with a 114 mm diameter Conflat flange and differentially pumped ZnS viewport by turbomolecular pump.
This apparatus transferred the polymer solution and CO2 separately through the nozzles placed in the stainless steel flange (anode electrode), whose diameters were 0.25 to 0.75 mm and 3.175 mm, respectively.
The design parameters were: the length of the shaft, the diameter of the flanges, the thickness of the flanges, and the material type.
The magnitude of the critical counter-pressure increased in flange extrusion of smaller inner diameters.
A special double flanged covered expandable stent of 10 mm in the saddle length (between the two flanges) and 10 mm in diameter when expanded (Axios, Xlumena, Mountain View, California, USA) was then uploaded on the guidwire.
The effects of CHS brace diameter to H-shaped chord flange width ratio, H-shaped chord flange width to thickness ratio (2γ), and CHS brace to H-shaped chord flange thickness ratio on the ultimate strengths of tubular joints were evaluated.
