"fitted to the surface" is correct and usable in written English.
You can use it when you want to talk about something that has been adjusted or adapted to fit a particular surface. For example, "The new shelves had to be specially fitted to the curved surface of the wall."
A cylinder is fit to the surface of the geometry, so the coaxial deviations can be measured as shown in Fig. 8.
The mesh generated has to fit to the surface, without distorting the form; meanwhile the panels have to preserve their planarity in order to prevent any brittle failure due to warping.
(Consistent results were obtained for λ = [0.03, 0.07].) A 2-D TPS is fit to the surface, where the number of control points used is determined by the size of the surface along each axial dimension.
To compensate for the two different artifacts seen in the dataset, the flattening is done in two steps (see Fig. 3): A 2-D TPS is fit to the surface, where the number of control points used is determined by the size of the surface along each axial dimension.
Open image in new window Fig. 2 Surface roughness average (Ra): the arithmetic mean roughness of all points from a plane (centre line) fitted to the test surface .
Laminates, also known as veneers, are fitted to the front surface of each tooth after it has been shaved down half a millimeter, the thickness of a fingernail.
The data were fitted to the response surface model (7).
The results of DPPH, ORAC and total polyphenol content (TPC) were fitted to the response surface methodology models (R2 = 0.9936 0.9869).
(c) Arithmetic mean roughness (R a ): the average roughness or deviation of all points from a plane (centre line) fitted to the test surface (Fig. 2).
He showed that the calculated GH-JRC using the IHA method was very close (≤2 mm) to the geometric center of rotation which was defined as the center of the sphere fitted to the glenoid surface with the radius of the humeral head [14].
