Sentence examples for first group of experiments from inspiring English sources

The simulation parameters are set as those in the first group of experiments.

The optimal SiO2/MoS2 mixing ratio was obtained from the first group of experiments.

Table 9 shows the results of the first group of experiments.

In the first group of experiments, we used the same real datasets tested by Tzitzikas et al. [6].

The first group of experiments was carried out at 950°C under an Ar flow rate of 70 sccm.

In the first group of experiments, the influence of the SiO2/MoS2 mixing ratio on the lubrication behaviors of nanofluids was discussed.

In the first groups of experiments, the CS was held constant, and the effects of contact angle, disk diameter, aggregate size, and thickness of the disk on the standard deviation of the measured ITS values were studied.

The third group of experiments is to investigate the impact of t ′ on the performance of our algorithm.

The second group of experiments is to investigate the impact of α on the performance of our algorithm.

The second group of experiments were done with different data rates and are presented in Figure 2(b).

Furthermore, the second group of experiments explores the effectiveness of the methods employed to deal with the lack of sufficient local context around hyperlinks.