Sentence examples for finished thickness from inspiring English sources

Plane the wood until it is the finished thickness.

The NR growth finished at a thickness of 1000 nm read by a quartz crystal microbalance [10, 12].

The plate is mechanically finished to ensure uniform thickness and to provide properly bevelled edges; metal from nonprinting areas is routed out to avoid ink smudges.

Use the filler tape to provide 75% to 95% of the thickness of the wire's insulation on the connector and use the vinyl electrical tape to finish to 100% thickness.

The accomplishment of adherent and continuous diamond coatings on tool steel substrates with CrN interlayers is determined by many key parameters such as appropriate surface finish, interlayer thickness, substrate temperature and system pressure.

Several strips of bamboo were glued together, retaining the strength and pliancy of the cane but greatly reducing the thickness and weight of the finished rod.

A galvanized surface coating with an average thickness of 0.0254 mm is finished on each face of the steel deck.

The thickness of the needle determines the finished size and look of your finished piece.

Be aware that even finished lumber may vary slightly in width and thickness, so this step is important for a good finished project.

The second side was dimpled and finished with a 1.0 μm diamond slurry to a thickness of about 20 μm.

Finally, the coil is rolled under tension in a finishing mill, where the thickness is controlled by sensors.