Sentence examples for final frequency from inspiring English sources

The solid line represents the final frequency counts of all symbols and the dotted line indicates the final frequency counts of all symbols.

The resulting spectra were smoothed over nine frequency bands, using a triangular window (final frequency resolution is ~4.16 mHz).

The final frequency resolution that is obtained is defined by the number of channels and the channel's bandwidth.

where f(x i ) is the original frequency counts of the symbol and f′(x i ) represents the final frequency counts distribution assigned to drive the arithmetic coder.

The conditions used include; 0 0.5 V, start frequency; 1 KHz, final frequency; 1000 KHz, and step frequency; 1 KHz (that was the optimum condition for the samples).

To analyze the fluctuations, we used the Fourier transform of 1-h time series (frequency resolution approximately 0.28 mHz); each spectrum was smoothed over nine frequency bands using a triangular moving window (final frequency resolution approximately 1.39 mHz).

The final frequency-selective SAD results after comparing the SNR estimate with the limit Θ SNR4 SAD ̂ m ( ℓ, k ) = SAD ̂ m ′ ( ℓ, k ), if ξ ̂ m ( ℓ, k ) ≥ Θ SNR 4, 0, else.

Therefore, the initial and final frequencies, and of the linear chirps representing all watermark messages are constrained to.

The watermark message is a 1-bit quantized amplitude version of the normalized chirp on a TF plane, with initial and final frequencies and, respectively.

The FFR amplitude results held when, instead of comparing the peak amplitudes, the frequency was fixed at 330 Hz for both Note 1 and Note 2 (first half: t(10)  = −0.191, p = 0.852; last half: t(10)  = −3.677, p = 0.004); A final frequency-domain analysis evaluated how the H2 of Note 2 changed over smaller increments of time (four ∼20 minute blocks).

However, the final frequencies in the LF populations were significantly lower than predicted (one-sided t-test, p <0.001).