Sentence examples for final alloy from inspiring English sources
The Al-content in the final alloy is about 1 at% because of a small reaction to the crucible material.
Even if small variations are expected in the lattice parameter of the alloys, the Vegard's law: where a(GaAs 1 − x Ge2x, aGe, aGaAs are the lattice parameters of the final alloy and its components, respectively, represents a useful tool for predicting a trend in terms of lattice parameter variation for our alloy models.
These micrometer-sized powders were mixed in different ratios to obtain powder mixtures with final alloy compositions of Fe100− xCu x (x = 15, 30, 50, 85).
The mechanism for this correlation is explained through the effect of melting point on solid-state diffusion and mechanical disintegration which are critical for the final alloying.
Several metal alloys, the final one a cobalt-chromium alloy, corroded or fused.
The green body was then hot extruded to obtain the final GNFs reinforced aluminum alloy nanocomposite.
Recent experimental studies [e.g. Y. Liu et al., Acta metall. mater.42 7), 2247 (1994)] have shown that final stage densification of alloy powders and metal-coated fibers occurs by the creep collapse of cusp-shaped voids at rates significantly higher than those predicted by the conventional spherical pore analyses of current consolidation models.
These values showed the almost perfect matching between GaAs and Ge lattice parameter and at the same time the marked deviation of model IIb from the trend, thus confirming the main contribution of "bad bonds" to the final instability of the alloy.
However, for engineering alloys, the final properties depend not only on chemistry but also on the path of microstructure development which necessitates characterization of microstructure evolution for each chemistry.
In other words, the calculated excess energy of the two intermediate models (IIa and IIb, xGe = 0.5), clearly showed that the octet rule violation has lead to the final instability of the alloys.
The final thickness of 5754O aluminum alloy sheet under different loading paths is obtained from the FLD-strain.
