Sentence examples for filter superficial from inspiring English sources

Since the multiple scattered light is randomized polarized, contributing equally to channel 1 and 2, the subtraction of channel 1 from channel 2 can eliminate the effect of backscattered photons and filter superficial backscattered photons.

Light was delivered through a 630±10-nm interference filter for superficial tumour illumination with a fluence rate of 80 90 mW cm−2.

A calculation of the model gas activity of the catalytic filter at a superficial velocity of 2 cm/s based on the disk measurements results to 99% naphthalene conversion at 850 °C in the absence of H2S and 94% in the presence of 100 ppmv H2S.

According to a recent sensitivity study in a similar geological environment (Abdelfettah et al. [2014]), we may estimate the deep structures appearing at the applied long-wavelength filters to be located in about 6- to 8-km depth; the 10- to 20-km filter typically indicates superficial often Quaternary deposits by negative anomalies.

Provided the microscope setup is equipped with the appropriate filter sets, first superficial information on the intracellular distribution can be obtained from conventional fluorescence microscopy.

But the truth is, our lack of trendiness kind of filters out the superficial people and helps me find the authentic people who truly fit our culture.

Such "spatial low-pass filtering" of the superficial brain noise sources will alter their signal space vectors by decreasing their amplitudes and smoothing the corresponding field distributions.

The important parameters taken into consideration include the mass flow rates of filter granules and filtration superficial velocities.

A series of experiments were carried out at room temperature to demonstrate the collection efficiency of this method of filtration technology (i.e., the moving granular bed filter) at different filtration superficial velocities and mass flow rates of filter granules but with a fixed inlet dust concentration.

A specific pilot plant, based on a conical fluidised bed of glass beads, used to disperse fixed parcels of Diesel soot into a given gas flow rate, was used to assess the pressure drop and the filtration efficiency of the foam traps as a function of the soot particle size, the soot load in the filter, as well as the superficial velocity.

As a result, the filtered GE-fMRI responses in the superficial depths were still present but less pronounced and displayed constant retinotopic specificity across cortical depths.