The impacts of initial concentration ratio of O2 to CO, filling volume ratio of the TiO2 particles combined with silica to reactor, and different preparation methods of TiO2 with adsorbent on the CO oxidization performance are investigated.
The optimum initial concentration of O2 and best filling volume ratio of the TiO2 particles combined with silica to reactor was found to be 4 vol% and 50 vol%, respectively, under the experimental conditions.
First, the balloon filling volume is determined by the geometric volume of the balloon (Fig. 3): the larger the geometric volume, the larger the balloon filling volume that is needed to reflect surrounding pressure.
Second, the balloon filling volume required for accurate measurement increases as the balloon surrounding pressure increases (Fig. 4).
Using our sigmoid fitting method, we confirmed previous two major findings regarding the relationship between balloon filling volume and geometric volume and surrounding pressure [14, 15].
And TL1-1 production was greatly improved in the range of filling volume from 30 to 90 mL, while sharply decreased from 90 to 150 mL (Fig. 2c).
For a 2.5 L baffled Tunair shake flask with 800 mL filling volume, they determined an incubator shaking speed of 180 rpm for equivalent oxygen uptake (Baumann et al. 2015).
The filling volume of the complete device is between 400 and 500 mL, depending on the length of the tubing.
To compensate for differences in heart weights (and consequential wall thickness), wall stress was calculated for each filling volume VB.
The following cultivation parameters were applied: 350 rpm shaking frequency, 50 mm shaking diameter, 10 mL filling volume in 250 mL RAMOS flasks.
Interestingly, we have noticed that there was a substantial ATP release in intraluminal fluid in the early filling stage, that is, bladder filling volume of 200 mL.
