Sentence examples for fiber detection from inspiring English sources

For fiber detection of fibronectin (Abcam Inc ., 3D cultures were first permeabilized with 4% paraformaldehyde containing 0.5% Triton® X-100 for 3 minutes and then further fixed for 20 minutes using 4% paraformaldehyde containing 5% glucose.

Collagen fiber detection was performed by means of Sirius red (Direct Red 80) staining [ 39].

One other technical limitation of the measurement scheme is its relatively low SNR because of the small detection area (i.e., due to the use of single-mode fiber detection for DCS).

Test results showed that the dispersion coefficient αf was calculated reasonably and the fiber-detection performance was enhanced.

Several batch and column experiments were conducted to analyze the performance of the fiber optic detection system.

Moreover, it has been shown that the original design of the fiber enables detection of weak concentrations of pollutants down to 1 ppm.

Moreover, it is shown that the original design of the fiber enables detection of weak concentrations of pollutants down to 1 ppm of C2Cl4.

The optical fiber hydrogen detection system employs a dual-path design of reflective intensity measurement, and therefore to eliminate the noise suffered from light source fluctuation, fiber loss fluctuation, and temperature.

According to the experiment, dynamic range of the method may support PON optical fiber fault detection with branching ratio of 1 128 and transmission distance of 20 km, and the discrimination is about 10 cm.

Fiber counts (detection limit, 0.3 F/L) were conducted by SEM, and fibers were identified as asbestos fibers by EDXA.

However, values for the emission that can be coupled back into the fiber for detection is often not reported.