Sentence examples for fiber confinement from inspiring English sources

ECC showed certain improvement in bond strength with some enhanced post-peak behavior (more ductility) due to high fiber confinement.

It also shows well-defined structures consisting of concentric layers because of curving of the lamellar phase due to fiber confinement [73].

The calculated effective mode area is 16.01 μm2 at 1550 nm, corresponding to a coupling loss of 1.35 dB to the Corning SMF28 fiber, the confinement loss and bending loss with 1 cm bending radius less than 0.058 dB/km and 0.315 dB/km at 1550  nm, respectively.

A new nonlinear dispersion flattened photonic crystal fiber with low confinement loss is proposed.

FRP (fiber reinforced polymer) confinement has been proven to be effective in enhancing the structural performance of concrete columns.

In addition to this, the proposed fiber exhibits low confinement loss of 8.96 × 10-3 dB/cm and low flattened dispersion of 0.96 ± 0.086 ps/THz/cm for the optimal design parameters.

The different parameters considered in the analysis include: the strength of concrete, yield strength and amount of longitudinal steel rebar, level of axial load, shear span-depth ratio, and carbon fiber reinforced polymer confinement layer.

However, it can be noticed from the test results that the higher tensile strength and toughness (due to fiber presence and confinement) of ECC could affect the bond strength the prediction equations should include compressive strength and some parameter that takes into account the influence of enhanced tensile strength and confinement.

The analytical investigation examines the suitability of using existing high-strength concrete and fiber reinforced concrete confinement models to predict the axial response of the columns tested in this research program.

The V parameter of microstructured optical fibers and the confinement loss requirement set a limit on the maximum sensitivity achievable from index-guiding microstructured fibers.

Fiber-based inertial confinement fusion (ICF) laser driver provides a new pathway to realize the inertial fusion energy (IFE).