Sentence examples for fiber collimator from inspiring English sources

To ensure full spatial coherence, the laser beam is coupled into a single mode fiber and further collimated by a fiber collimator.

This letter presents the design, simulation, fabrication, and successful demonstration of a variable optical attenuator (VOA) based on a micromachined micromirror combined with an optical fiber collimator.

This out-of-plane polymer 3D microlens array is pre-aligned with the fiber collimator arrays with no additional adjustment and assembly required, therefore, it helps to dramatically reduce the running cost and improve the alignment quality and coupling efficiency.

Experimental proof of concept demonstration using one dual fiber collimator and a three-axis controlled mirror as a 3-D beam spoiling element shows a high 52.4 dB dynamic range and a very low optical loss of 0.12 dB at 1550 nm wavelength.

The probe consists of the MEMS lens scanner, a printed circuit board (PCB), a GRIN fiber collimator, and objective lens, and an aluminum housing (Fig. 5d) [13].

In the JOKARUS MTS setup, the pump beam is launched from a fiber collimator (Schäfter + Kirchhoff) with a beam diameter of 2 mm and is guided twice through an iodine cell with a length of 15 cm, resulting in an absorption length of 30 cm.

Each unit comprises three optical fiber collimators, one photo detector and one optical window.

A pair of optical fiber collimators is used to couple the optical signal due to the large size of the mirror.

In this paper, fiber collimators in coupling are analyzed in order to characterize the insertion loss and output power equalization in OADM and OXC.

Thermally-induced angular misalignment of fiber collimators in the laser packaging of optical devices is studied experimentally and numerically in this study.

optical-fiber-collimators (OFC) in future practical systems.