Sentence examples for fiber coatings from inspiring English sources

Additionally, although the five fiber set comprises five of the six different fiber coatings evaluated, it is also noteworthy that the inclusion of the sixth fiber coating (85 µm PA) is not as effective as inclusion of the 75 µm CAR-PDMS fiber (Table 4).

However, the design and preparation of these fiber coatings still remain a considerable challenge.

Three different fiber coatings were tested and compared for sensitivity and reproducibility.

Five different fiber coatings were employed in this study; also, extraction temperature was studied at three levels.

It overcame the drawbacks, such as leak of solvents and damage of fiber coatings, associated with current SPME fibers and SPME LC interface.

Scanning electron micrographs were obtained for three PIL-based coatings following approximately 70 extraction/desorption steps, wherein the fiber coatings were observed to be largely smooth and intact.

A finite element technique is used to study the effects of coating properties on the deflection and penetration of cracks which terminate perpendicular to the fiber-coating or coating-matrix interfaces.

Local shear stresses along the fiber-coating and the matrix-coating interfaces are calculated.

Mechanical anisotropy of scheelite (CaWO4) has made it attractive as oxidation resistant fiber-coatings in high temperature ceramic composites.

The loose entanglement from the thin silane coatings cannot induce an increased strength between the fiber coating and matrix so that the fibers are easier to be pulled out.

The fiber coating takes up the compounds from the sample by absorption in the case of liquid coatings or adsorption in the case of solid coatings.