Sentence examples for feed wire from inspiring English sources

Since the anode tends to have a greater heat concentration, this results in faster melting of the feed wire, which increases weld penetration and welding speed.

You now twist the ends together, cut the feed wire, and bend the cut ends back.

String 1 4mm crystal bead and 5 small glass beads; then feed wire tip back through the 4mm crystal bead and pass the tip through the next adjoining beads (1 4mm crystal bead, 1 small glass bead, 1 crystal bead).

Before you cut any wires, it is recommended that you check both the hot and neutral feed wires for voltage with respect to ground.

The total leakage current J0 and the height of the feeding wire h are 20 A and 5 m, respectively.

In principle, the traction current needed to move a train should flow in a closed circuit formed by an overhead feeding wire and a return path along the rails.

Gas metal arc welding (GMAW) - commonly termed MIG (metal, inert gas), uses a wire feeding gun that feeds wire at an adjustable speed and flows an argon-based shielding gas or a mix of argon and carbon dioxide (CO2) over the weld puddle to protect it from atmospheric contamination.

Hammering a hole in the wall, he fed wires through.

The trains are always assumed to get the traction current from the nearest substation south of the train by feeding wires at the height of 6 m.

Feed the wire into the rod until you reach the end of the wire.

3. Feed the wire through the clothes pegs alternating the height of each peg so that it creates the correct pattern.